Featured on Home Page

RSS

Factors contributing to falls from ladders include haste, sudden movement, lack of attention, the condition of the ladder (worn or damaged), the user's age or physical condition, or both, and the user's footwear.

Falls are the leading cause of death in construction. In 2016, there were 370 fatal falls to a lower level out of 991 construction fatalities (BLS data). These deaths are preventable.

OSHA requires employers to ensure the safety of all employees in the work environment. Eye and face protection must be provided whenever necessary to protect against chemical, environmental, radiological or mechanical irritants and hazards.

In the United States, workers required to wear respiratory protection must pass an annual respirator fit test. Fit tests help companies ensure worker safety by verifying a respirator can provide an OSHA-mandated and standardized level of protection.

The standard applies to all general industry places of employment, including agricultural services, manufacturing, transportation and utilities, wholesale trade, food stores, hotels and other lodging, health services, museums, botanical gardens and zoos.

The standard applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below 25 μg/m3 as an 8-hour TWA under any foreseeable conditions and those occurring during agricultural operations covered under 29 CFR part 1928 and and exposures that result from the processing of sorptive clays.

Any entity doing construction work, such as building a new structure or upgrading an old one, must follow the construction confined space rule. Because the new rule applies to all employers who perform construction activities in a confined space, safety managers in all industries should become familiar with the standard.

Experts say 45001 is not easy to apprehend when read as a normal book, especially if you are not familiar with the ISO framework of 9001 and 18001. You have to realize the interconnections between specific clauses. Experts advise finding a good training course to help realize the standard’s full potential. You may also want to consider employing consultancy services to assist.

NFPA 70E® Standard for Electrical Safety in the Workplace® provides requirements for establishing a workplace that is safe from unacceptable risks associated with using electricity while working. Safety processes, policies, procedures and program controls reduce the risks associated with using electricity to an acceptable level.

OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in long shoring operations. In addition, OSHA requires that fall protection be provided when working over dangerous equipment and machinery, regardless of the fall distance.