Revco Industries is excited to announce their newest addition to their ToolHandz® line of mechanic’s gloves. The GX108 impact-resistant mechanic’s glove is perfect for oil, gas, and mining.

A narrated computer animation recreating the Deepwater Horizon blowout on April 20, 2010 depicts how high-pressure oil and gas from the Macondo well in the Gulf of Mexico caused an explosion on the drilling rig that killed 11 workers and seriously injured 17 others.

The blowout preventer (BOP) that was intended to shut off the flow of high-pressure oil and gas from the Macondo well in the Gulf of Mexico during the disaster on the Deepwater Horizon drilling rig on April 20, 2010, failed to seal the well because drill pipe buckled for reasons the offshore drilling industry remains largely unaware of, according to a new two-volume draft investigation report released today by the U.S. Chemical Safety Board (CSB).

Although worker safety hazards in the oil and gas extraction industry are well known, there is very little published data regarding occupational health hazards (e.g., types and magnitude of risks for chemical exposures) during oil and gas extraction operations.

New York State Department of Transportation (NYSDOT) Commissioner Joan McDonald said the Department will issue the maximum fine allowed under state law to Canadian Pacific Railroad  for failing to report, as required, the derailment of four tank cars carrying crude oil early Monday morning in Albany.

The Center for Offshore Safety hosted leaders from industry, the Bureau of Safety and Environmental Enforcement, and the U.S. Coast Guard last week for an in-depth discussion of efforts to enhance the safety of offshore oil and natural gas development.
 

One of the major controversies involving hydraulic fracturing – or, “fracking” – will be the subject of an EPA inquiry that could lead to new regulations on the industry.

Four years after an explosion on BP’s Deepwater Horizon oil drilling rig killed eleven workers and caused the largest offshore oil spill in U.S. history, the U.S. Chemical Safety Board (CSB) is ready to release its report into the causes of the disaster.

A massive explosion and fire at the Silver Eagle Refinery on November 4, 2009, in Woods Cross, Utah, which damaged homes in a nearby neighborhood, was caused by a rupture in a pipe that had become dangerously thin from corrosion, according to the U.S. Chemical Safety Board (CSB).