Experts say 45001 is not easy to apprehend when read as a normal book, especially if you are not familiar with the ISO framework of 9001 and 18001. You have to realize the interconnections between specific clauses. Experts advise finding a good training course to help realize the standard’s full potential. You may also want to consider employing consultancy services to assist.

NFPA 70E® Standard for Electrical Safety in the Workplace® provides requirements for establishing a workplace that is safe from unacceptable risks associated with using electricity while working. Safety processes, policies, procedures and program controls reduce the risks associated with using electricity to an acceptable level.

OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in long shoring operations. In addition, OSHA requires that fall protection be provided when working over dangerous equipment and machinery, regardless of the fall distance.

This article aims to recap basic information about hearing protection and how to help prevent long-term hearing loss. This is an important topic that should be reinforced in order to ensure workers are provided a comprehensive and efficient hearing protection products and programs.

Few employees may ever take notice of a freshly cleaned, well-maintained floor. Unfortunately, too few also tend to notice uneven surfaces that cause trips or spilled materials that can make floors slippery. That’s one of the reasons why it’s up to employers to make sure that these types of hazards are eliminated.

Machine safeguarding is the best way to prevent amputations. Guards provide physical barriers to hazardous areas. They should be secure and strong, and workers should not be able to by-pass, remove or tamper. Guards should not obstruct the operator’s view or prevent others from working.

Stories related to construction industry safety ranged this year from hazard-specific (spray foam insulation, concrete drilling) to regulations (silica, crane operator certification) to developments that affect construction safety in a more general way, like the workforce shortage or the legalization of marijuana in many states. Here’s a look back at 2018 articles:

A new warning about the skyrocketing rates of e-cigarette use among young people, a film crew member killed in New York City and 2017 work-related fatality statistics from the BLS were among the week’s top occupational safety and health stories featured on ISHN.com.

Cal/OSHA has cited a manufacturer of cannabis products for multiple serious safety violations following an explosion that seriously injured a worker. On June 19, an employee of Future2 Labs Health Services was working alone inside a 128-square-foot portable storage container in Watsonville, using propane to extract oil from cannabis leaves.

According to the Michigan Occupational Safety and Health Administration (MIOSHA), an important step toward keeping Michigan workers safe from lead exposure in the workplace was realized last week with the filing of updated administrative rules that lower acceptable blood lead levels, replacing decades-old standards. The new rules became effective December 11, 2018.