A 54-year-old worker died after he fell into a vat of sulfuric acid at a South Lyon-based steel manufacturing firm (Michigan) in what is being described as a "serious industrial accident." The man was fully submerged in the 10 percent to 12 percent sulfuric acid solution as his Michigan Seamless Tube co-workers worked desperately to pull him from the industrial container, burning themselves from the at least 160-degree chemical solution, Fire Chief Robert Vogel said.

If you can’t get your crew to a safety training, there’s a bus which will bring the training to you. A bus which is outfitted for certified safety training is an innovative wrinkle to get this most important job done, says Randy Dignard, president of Industrial Safety Trainers.

Did changes that allowed a 2001 Ford Excursion stretch limousine to carry 18 people contribute to the horrific death toll in an October 6, 2018 accident in upstate New York? That’s one of the question the National Transportation Safety Board (NTSB) is attempting to answer in its investigation into the tragedy, which killed the driver and all 18 passengers in the limo – many of them related to each other – and also claimed the lives of two pedestrians.

The first woman U.S. Navy F-14 Tomcat fighter pilot and an innovator in health care technology will be the keynote speakers at The American Industrial Hygiene Conference and Expo, to be held in May at the Minneapolis Convention Center. AIHce EXP 2019 runs from May 20-22, with professional development courses offered May 18, 19 and 23.

A new and improved Protecting America’s Workers Act (PAWA) has been introduced into the House of Representatives by Congressman Joe Courtney (D-CT). Similar versions of this bill has been introduced every year for over a decade. The bill number is H.R.1074.

The EPA says it has put together a nationwide plan to address PFAS - an environmental danger that has gained prominence and raised alarm in recent years. The acronym stands for per- and polyfluoroalkyl substances, a group of man-made chemicals that have been manufactured and used in a variety of industries around the globe, including in the United States since the 1940s.

The manufacturing industry requires workers to engage in high-risk activities, such as soldering, welding, metal cutting, raw material assembling, and heavy lifting and rigging. Moreover, magnetic fields, compressed gases, and harmful radiations can negatively impact a worker’s health. In fact, workplace hazards lead to nearly 150 deaths per day in the US.

The clear skies offered good visibility and a lookout was posted on the morning of November 30, 2018, but those factors didn’t prevent a CSX Transportation freight train from striking and killing a track welder. The National Transportation Safety Board’s (NTSB) preliminary report on the incident offers few clues as to why the accident occurred. According to the report, the accident in Estill, South Carolina occurred as the train – traveling at about 50 miles an hour – approached a location where a welder was at work on the track.

Compressed air is integral in nearly every industry, from powering tools and providing pressure for robotic assembly arms to inflating tires and even cleaning off dusty surfaces. Companies might offer training on how to use compressed air and its related tools, but does any of this include how to use them safely? Why should companies offer compressed air safety training, and what negative repercussions could they face for not providing it?

If your employees wear small, wearable devices powered by lithium batteries – such as body cameras – they are potentially at risk from burns or other injuries if the devices catch fire or explode. Those outcomes may occur if the batteries are defective or become damaged. There were more than 25,000 overheating or fire incidents involving lithium battery-powered consumer products over a recent five-year-period, according to the U.S. Consumer Product Safety Commission.