Exits at a Ohio United Parcel Service (UPS) distribution center weren’t just temporarily blocked, according to the OSHA inspectors; some were permanently locked.
The company was cited for repeatedly putting workers at risk by obstructing exit routes at its Sharonville, Ohio, distribution center and faces $208,603 in proposed penalties for those violations.
Control of Hazardous Energy (Lockout-Tagout) General Industry (1910.147)
January 4, 2019
Workers servicing or maintaining machines or equipment may be seriously injured or killed if hazardous energy is not properly controlled. Injuries resulting from the failure to control hazardous energy during maintenance activities can be serious or fatal. Injuries may include electrocution, burns, crushing, cutting, lacerating, amputating, or fracturing body parts.
OSHA statistics indicate that there are roughly 85 forklift fatalities and 34,900 serious injuries each year, with 42 percent of the forklift fatalities from the operators being crushed by a tipping vehicle.
Factors contributing to falls from ladders include haste, sudden movement, lack of attention, the condition of the ladder (worn or damaged), the user's age or physical condition, or both, and the user's footwear.
Training Requirements for Construction Industry (1926.503)
January 4, 2019
Falls are the leading cause of death in construction. In 2016, there were 370 fatal falls to a lower level out of 991 construction fatalities (BLS data). These deaths are preventable.
OSHA’s Eye and Face Protection standard was the tenth most-frequently cited agency standard in FY 2018.
January 4, 2019
OSHA requires employers to ensure the safety of all employees in the work environment. Eye and face protection must be provided whenever necessary to protect against chemical, environmental, radiological or mechanical irritants and hazards.
OSHA has cited roofing company Aspen Contracting Inc. – based in Lee’s Summit, Missouri – and subcontractor J Cuellar LLC – based in West Bend, Wisconsin – for exposing employees to dangerous fall hazards at a Fountain, Colorado construction site. The companies face proposed penalties totaling $147, 998.
In the United States, workers required to wear respiratory protection must pass an annual respirator fit test. Fit tests help companies ensure worker safety by verifying a respirator can provide an OSHA-mandated and standardized level of protection.
29 CFR 1910.146: OSHA Confined Space Standard – General Industry
January 3, 2019
The standard applies to all general industry places of employment, including agricultural services, manufacturing, transportation and utilities, wholesale trade, food stores, hotels and other lodging, health services, museums, botanical gardens and zoos.
The standard applies to all occupational exposures to respirable crystalline silica, except where employee exposure will remain below 25 μg/m3 as an 8-hour TWA under any foreseeable conditions and those occurring during agricultural operations covered under 29 CFR part 1928 and and exposures that result from the processing of sorptive clays.