Every day on the job a construction worker is killed by a fall and about 40 are seriously injured. You could easily be one of them. All it takes is a slip or trip and down you go.
Inspect your equipment before each use.
Replace defective equipment. If there is any doubt about the safety of the equipment, do not use it and refer questionable defects to your supervisor.
Replace any equipment, including ropes, involved in a fall. Refer any questionable defects to your supervisor or check with the manufacturer.
Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls. OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
Fatalities caused by falls from elevation continue to be a leading cause of death for construction workers, accounting for 337 of the 874 construction fatalities recorded in 2014 (BLS preliminary data). Those deaths were preventable. Fall prevention safety standards were among the top 10 most frequently cited OSHA standards, during fiscal year 2014.
The American Society of Safety Engineers (ASSE) today announced Thomas Kramer, managing principal at LJB Inc., an Ohio-based civil engineering firm, as the 2016 Edgar Monsanto Queeny Safety Professional of the Year for his leadership in helping develop more than 18 fall protection standards.
On Tuesday, May 3rd, work in Washington D.C. will come to a halt. No, it won’t be the usual partisan gridlock on Capitol Hill. The work stoppage in question will take place at the construction site of the MGM National Harbor Resort and will be part of OSHA’s third annual National Safety Stand-Down.
After two workers suffered partial amputations of their index fingers in separate incidents in October 2015, federal investigators found numerous machines lacked safety guards at the Holdrege facility of Becton, Dickinson and Company, a global medical technology company.
OSHA proposes $280K in fines for roofing company after two recent inspections
April 14, 2016
Recent federal inspections of Florida construction sites finds Jasper Contractors Inc., a Georgia-based roofing company, is continuing its seven-year history of ignoring safety and health laws and putting workers at risk of serious injury or death.
Leading fall protection and safety specialists tour U.S. to educate construction workers about fall protection and dropped object prevention during 2016 National Safety Stand-Down
April 12, 2016
3M’s Capital Safety will host fall protection demonstrations throughout the U.S. May 2-6, 2016, during OSHA’s National Safety Stand-Down. Capital Safety has historically been involved in OSHA’s Stand Down and is proud to participate in this campaign to remind and educate employers and workers in the construction industry about the serious dangers of falls and dropped objects.
Premier Waukesha, Wisc. fabricator of structural steel platforms, vertical lifts, and facility safety products will celebrate major company milestone throughout 2016
April 12, 2016
Material handling equipment and safety products manufacturer, Wildeck, Inc., will mark a major milestone and celebrate its 40th anniversary throughout 2016. The company was established in Waukesha, Wisc. in 1976 and has evolved to become the only U.S. manufacturer of structural steel platforms, vertical lifts (VRCs), and safety guarding products in North America.