Electrical Safety Assessment Quiz Answers

THANK YOU for taking our quiz! Are you really looking to take your Electrical Safety Knowledge to the next level? Check out these Electrical Safety Training Courses!!

Here are the answers:

1. One of the main functions of personal protective grounds is to provide a _______ impedance path for a short circuit.

• A) High
• B) Low
• C) Smooth
• D) Adequate

2. A Safety Electrical One Line Diagram should be used to ______________ all sources of electrical energy.

• A) Identify
• Castigate
• C) Evaluate
• D) Modify

3. Work performed on an electrical system within reaching distance of energized components is________work.

• A) Energized
• B) Essential
• C) Safe
• D) Unavoidable

4. The Prohibited Approach Boundary is considered the same as making_____________.

• A) Insulation
• B) Confluence
• C) Contact
• D) Pastry

5. The minimum allowable work space around electrical equipment is ________ inches deep.

• A) 36
• B) 48
• C) 24
• D) 30

6. The secondary of a current transformer must never be ____________ while energized.

• A) Grounded
• B) Opened
• C) Examined
• D) Shortened

7. Which is the “Can’t Let Go” range of current flow?

• A) 3-9 ma
• B) 9-25 ma
• C) 25-60 ma
• D) 1-3 ma

8. OSHA requires the testing of a volt meter after a voltage test on voltage above______.

• A) 120v
• B) 208v
• C) 277v
• D) 600v

9. One of the three generally recognized hazards of electrical work is____.

• A) Arc Flash
• B) Cuts
• C) Falls
• D) Concussion

10. Gloves used for electrical protection must be electrically tested every…

• A) 3 months
• B) 6 months
• C) 12 months
• D) Never